Over the last six months the various subsystems of the
LUT Prototype have been assembled and bench tested by the individual project
partners. Here are some details of the robot system:
The laser measurement system is mounted on a KR30-L16
Kuka Robot which is in turn mounted on a KL1000 Linear Track with rated travel
of 2700mm. The system is controlled by a Kuka KRC4 robot controller and a
bespoke, integrated control system which interfaces directly with the LUT
system, providing the control signals for operating the lasers. The photograph below shows the robot system fully assembled prior to installation of the
safety enclosure:
We read your blog website, share most practical information in blog. Robot 6 Axis
ReplyDeleteThis post is really awesome. Genuinely i like this blog. It gives me more useful information. I hope you share lots of things with us .pick and place robots
ReplyDelete